Project U-232
6 Attachment(s)
Official Forum:
https://u-232forum.servebeer.com Official Dev site https://u-232.servebeer.com IRC irc.mibbit.com #09source Please note that in order to join IRC then you need to be a member on the dev site also you need to use your exact site username !!! Code Repository's : https://github.com/Bigjoos/U-232 https://github.com/Bigjoos/U-232-V1 https://github.com/Bigjoos/U-232-V2 https://github.com/Bigjoos/U-232-V3 https://github.com/Bigjoos/U-232-V4 https://github.com/Bigjoos/U-232-V5 Main requirements U-232 now requires MySQLI, V1 & V2 still use MySQL for now, will soon be MySQLI Gd2 memcache for V1 and V2 mcrypt SSL Recommended APC V3 Main requirements Gd2 memcache memcached Mysqli mcrypt SSL Sphinx What the heck is U-232 ? It was called Installer09 but we decided to change that. Well U-232 is a fully modded source code, Its based on Tbdev 09 final which is based on Tbdev which is based on Tbsource which is based on TorrentBits which is based on Bytemonsoon ha ha, so thanks to all those guys for the great work on the base code through the years and variants. It succeeds Codex Installer/Tbdev Installer but this time around its had 15 odd months work done behind the scenes before being released for public usage. The source code is set up well and follows good web standards specifically because the source code is Xhtml valid. It has a standard version for everyone also V1 which is memcached and V2 is memcached as well with much more development than the previous two. Its simply a free modded source code built for the masses but with a sting in its tail just like its namesake. The V2 version is efficient and already performing extremely well but its not finished by a long shot, generally you will see that it ticks over @ 0 querys on homepage in between cache expires or events freeing up huge mysql resource, the announce has the user query memcached as well so its going in the correct direction however were continually working on the code and changing or improving stuff. V2 sports modifications that are in no other source code, the memcached routines did not exist either until it was all built. I will answer most support related questions and install issues on a limited basis. I have my own SVN and forum with every single modification used for this project, and to close i would just like to say a massive thank you goes out to all involved. You all know who you are and i couldn't have got this far without you all - Sharing is caring. Set Up Instructions : First extract pic.rar, javairc.rar, GeoIp.rar for V2 and ensure there not inside an extra folder from being archived then upload the code to your server and chmod - root - avatars - backup - bitbucket - cache and all nested files and folders - dictbreaker - dir_list - uploads - uploadsubs - imdb imdb/cache imdb/images - include - include/settings settings.txt install/extra/config.sample.php install/extra/announce.sample.php - logs - torrents. Create a new database user and password via phpmyadmin - Point to http://yoursite.com/install/index.php - fill in all the required data - log in - Create a new user on entry named System ensure its userid2 so you dont need to alter the autoshout id in config.php. Add your staff ids to config.php first. Add your staffnames to config.php to access staffpanel. V1 and V2 Installer is set up for linux if on windows then edit install/functions/database.php - its commented. tcl files are included - include each one one your eggdrop.conf. Please be aware full active support is retained only on the current SVN version which is V5, all previous versions are updated much less. Set Up Instructions v3: First extract pic.rar - javairc.rar and GeoIp.rar and ensure there not inside an extra folder from being archived then upload the code to your server and chmod - cache and all nested files and folders - dir_list - uploads - uploadsubs - imdb imdb/cache imdb/images - include - include/backup - include/settings settings.txt install/config.sample.php install/ann_config.sample.php - logs - torrents. Create a new database user and password via phpmyadmin - Point to http://yoursite.com/install/index.php - fill in all the required data - log in. As soon as you install do not enter staffpanel until you make the first edit which is cache/staff_settings2.php - replace admin with your username. Create a new user on entry named System ensure its userid2 so you dont need to alter the autoshout function on include/user_functions.php. Setup Instructions v4: U-232 V4 Please take note; Before you begin installation it is very important that your server is configured correctly and has all the required source code dependencies. Ensure your error reporting is enabled on the server and you are logging the errors and not just displaying them. A error on install is a failure to adhere to setup instructions. If you experience a failure then a properly configured server will report that issue, no excuses required. Install memcache and zend opcode cache before installing U-232 V4. 1. Create a directory one up from root so it resides beside it not inside it, named bucket. Then inside the bucket folder make another and name it avatar. If you use your own names for those folders then you need to edit bitbucket.php and img.php defines at top of the files. Then add a .htaccess and index.html files into both newly created folders. Then chmod those above folders. Then extract pic.tar.gz, javairc.tar.gz, Log_Viewer.tar.gz and GeoIp.tar.gz and ensure they are not inside an extra folder from being archived. Then upload the code to your server and chmod; - cache and all nested files and folders - dir_list - uploads - uploadsub - imdb imdb/cache - imdb/images - include - include/backup - include/settings settings.txt - install/extra/config.phpsample.php/config.xbtsample.php - install/extra/ann_config.phpsample.php/ann_config.xbtsample.php - sqlerr_logs - torrents 2. Create a new database user and password via phpmyadmin. 3. Point to https://yoursite.com/install/index.php - fill in all the required data and choose XBT or default - then log in. 4. Create a second user on entry named System ensure its userid2 so you dont need to alter the autoshout function on include/user_functions.php. 5. Sysop is added automatically to the array in cache/staff_settings.php and cache/staff_setting2.php. 6. Staff is automatically added to the same 2 files, but you have to make sure the member is offline before you promote them. |
complete 100 % excellent source coding !!!
this is so brilliant that its to die fore :lol: i like ur new work u spend so many hours on this, and all end up in nice code i personal hope to se more great project's from you in the future , thanks that this could go to bvlist sharing is caring :muscle: you can all be asured that this is the greatest source ! |
nice
nice so far joe hope you stick with it mate unlike the tbdev installer shame about that version left for dead
but always look ahead and thank you for ur / others hard work :drink::friend: |
the best source ever
|
hi, u r just awesome
but can u pls help me integrate the theme below in u-232 www.tbdev.net/topic/24250-the-ftl-theme/ |
Yeah i could make a template from it probably but i would need to see the code first in order for me to give a definite answer.
Bump: @ coko - Can you tell me which version your running please - Im guessing its U-232 standard ? And the css file for that template imports Code:
@import url("essentials.css") all; |
Been testing this source out for a couple of months now. Its a good solid source, easy to edit and add other mods/tools to.
Bigjoos, glad you've decide to keep on with the coding . Some would have been soured after all that went down . :drink: |
1 Attachment(s)
tnx for the reply bigjoos...the theme i attached is very sweet...more over easy to edit evn..
but problem wid the theme provided in u-232 is they are fully unstructured... if one theme is edited (uniqpixel 1.0 ) to fixed tables wid same alignment in browse/index (i mean lower sqeez the current table width to look gud) tnx:drink: |
What is svn address?
|
|
I try install U-232 V2 with subdomain and after signup show this error:
Code:
Error |
small issue i got installed successfully . But when i go to login it takes me back to login page like i am just refreshing the page nothing happens would anyone know why and a fix for it thank you in advance
Great Job on Source :drink: |
If your being bounced back to login then its the cookie_domain setting on config.php causing it so either set it as your domain no http or www or leave it blank sometimes need to clear your cookies when making changes there as well.
@ englezu because you have set it up incorrectly - Make sure the baseurl line is correct and make sure you use cookie_prefix no cookie domain Code was set up in subs by the beta testers ages ago. |
It does not work. My settings in config.php:
$INSTALLER09['cookie_prefix'] = ''; // This allows you to have multiple trackers, eg for demos, testing etc. $INSTALLER09['cookie_path'] = ''; // ATTENTION: You should never need this unless the above applies eg: /tbdev $INSTALLER09['cookie_domain'] = '.subdomain.domain.net'; // set to eg: .somedomain.com or is subdomain set to: .sub.somedomain.com $INSTALLER09['domain'] = 'http://subdomain.domain.net'; not working on subdomain? (I installed it on the domain and work. I can make my account and to log in.) |
Im not getting into a debate about if it works or not in sub domain, i know it does.
This needs modified to tell your one up from root : Code:
$INSTALLER09['baseurl'] = 'http'.(isset($_SERVER['HTTPS']) && (bool)$_SERVER['HTTPS'] == true ? 's':'').'://'. $_SERVER['HTTP_HOST']; Code:
$INSTALLER09['baseurl'] = 'http'.(isset($_SERVER['HTTPS']) && (bool)$_SERVER['HTTPS'] == true ? 's':'').'://'. $_SERVER['HTTP_HOST'].'/Subfolder'; Code:
$INSTALLER09['cookie_prefix'] = ''; // This allows you to have multiple trackers, eg for demos, testing etc. Code:
$INSTALLER09['cookie_prefix'] = '/subfolder'; // This allows you to have multiple trackers, eg for demos, testing etc. |
thank you got that sorted i dont have ops though i get this when going to staff panel sweet looking source well done :drink:
lol Incorrect access Silly Rabbit - Trix are for kids.. You dont have the correct credentials to be here ! |
All you need to do is open config.php and find :
PHP Code:
PHP Code:
Then few lines below find : PHP Code:
PHP Code:
|
Thanks Bigjoos works now. Great source! :drink:
|
done something wrong
I done what you said but for some reason it keeps demoting an not given systems op to BeetPete can u check see what i done wrong thanks
Code:
|
Well your using what looks like default U-232 V1 and trying to add V2 globals to it
PHP Code:
PHP Code:
|
ha ha i didnt even notice that what a moron i am sometimes thanks Bigjoss i tried to log on your forum to get V2 it is being moved ill look for V2 later on thanks again and well done to all on the source
|
memcache extension
hi i got it installed V2 but when i load the site and go to log in i get a white page and it says memcache extension not installed have i done something wrong ?
|
Well i did list the requirements on the main post and that means installing memcache on your server and ensuring its running so once you have that done you'll be able to use the code.
|
lests hope its not a mess
Lets hope its not a mass like u did the installer ll give it ago a
nd let u know big j from a old mate from years ago |
This is a great source code. Ideal for just about any admin no matter your coding level.
I have been using it for only a couple of months now, but see new bits being added all the time, which is a great indication on how the code will progress over time. Keep up the good work guys and gals. Also I would like to see some of the sites out there using this code :drink: |
why
Why rename it itz a 09 code why i do not know big j why 2downloads of it ? Ive all ready have this code from few monthz ago . What i never got crom here
|
There's a standard version == U-232 for those that cant get there head around installing memcache on there server or simply cant and theres 2 versions of the memcache version U-232 V1 and U-232 V2,V1 had 8 templates built for it and i faced a major issue updating 8 templates at a time so V2 was introduced, V2 had a complete re-design and got some systems added that are completely new in preparation for V3 which will sport .TPL, Its about choice but if your not happy sure i'll remove them and leave you less choice and a basic code. The rename is simply putting our brand on the code because were the ones that's spent 16 odd months developing it so you the end user simply has an alternative to the current source codes available.. im entitled to do that and lets be honest Installer09 sounds pathetic and ties it to 2 years ago.
|
thax getting back
Thax for your input on this one big J ll download the memcache from here as its the best of the code one morething can i remove themes ?
have one as there's is too many there is one i like only ? |
Aye if its V1 you have it has eight and you want say theme number 5 - simply take folder 5 rename it to 1 and then edit template.php and change any links from 5 to 1 and also the css file from 5.css to 1.css as number 1 template will always be the default - Use the template manager in admin panel to delete the entrys from db or add them - Its straight forward to change it to one template only just have to remember that there numbered and so is any links within those template.php files.
|
thax buzzing big J
Thax big J
|
MySQL
Hi I have the following problem in the Staff Panel>>>
when I go to the page>> admin.php?action =usersearch < MySQL is a mistake because then the following>>> MySQL Error There appears to be an error with the database. More is not because I hope you can help me! (I have this version of U-232.zip without memched) and then I also will be a question how do I disable mail Signup Thank you in advance already Sorry for my bad English |
Dont know about your error , I havent installed the V2 yet . But to disable mail confirmation
Include/config.php look for Code:
//==Auto confirm no email |
Hi thanks for your help cherwonk but such a code does not exist in my config file
|
takesignup.php find :
PHP Code:
PHP Code:
PHP Code:
PHP Code:
|
Hi I have successfully disabled the signup thanks for the help but the user search does not work with php page from the V1 that I get only a white page
|
u-232
i was do all right but i cant login with my account, when i login it return me to the login page :(
and now other problem when i tried to make another account Code:
Signup failed |
Quote:
Bump: Bump: Bump: Quote:
|
Well you can name it 1.css or you can edit template.php and call it main.css choice is yours there just what ever you find easier, as long as the name of the file is correct and on template.php its fine.
|
Quote:
|
Quote:
$INSTALLER09['cookie_path'] = 'some text'; $INSTALLER09['cookie_domain'] = 'some text'; you put some details here ======/include/config.php empty were i put some text without quotes and work the login if not work empty the cookie on your browser |
All times are GMT +2. The time now is 16:14. |
Powered by vBulletin® Version 3.8.11 Beta 3
Copyright ©2000 - 2024, vBulletin Solutions Inc.